E Series - EC1 Circular
Surface mounted white polycarbonate bodies with clear polycarbonate prismatic controllers. Control gear mounted on plug-in plates for ease of installation and maintenance. Supplied complete with lamp. Integral emergency operation and surface conduit spacer collars available.

E Series Lighting - EC4 Circular
Surface mounted white polycarbonate bodies with clear polycarbonate prismatic controllers. Control gear mounted on plug-in plates for ease of installation and maintenance. Supplied complete with lamp. Integral emergency operation and surface conduit spacer collars available.

E Series Lighting - E5 Square
Surface mounted white polycarbonate bodies with clear polycarbonate prismatic controllers. Control gear mounted on plug-in plates for ease of installation and maintenance. Supplied complete with lamp. Integral emergency operation and surface conduit spacer collars available.

E Series Lighting - ECX IP65 Circular
IP65 rated surface mounted white polycarbonate body with clear polycarbonate prismatic controller. Control gear mounted on plug-in plate for ease of installation and maintenance. Supplied complete with lamp. Integral emergency operation and surface conduit spacer collars available.

E Series Lighting - EC2
Shallow surface or semi-recessed all polycarbonate white body and opal diffuser. Supplied complete with lamps. Integral emergency operation, conduit spacer collars and semi-recessing kits available. Three styles of decorative additional trims may be added and clear prismatic diffusers may be specified to special order.

E Series Lighting - EC3
Shallow surface all polycarbonate coloured translucent body and opal diffuser gives attractive halo effect onto mounting surface. Available in White, Red, Blue and Green. White body also available with Brass or Chrome finish to front bezel. All supplied complete with lamps. Integral emergency operation and conduit spacer collars available. Prismatic diffuser may be specified to special order.

BZ1

BZ2

BZ3

E Series Lighting - EC2 / EC3 Trims and Lighting Accessories
These decorative trims clip firmly onto the bodies of the EC2 and EC3 lights and change their appearance and the light spill from the diffusers. Semi recessing kit and spacer collars also available for the EC2 and EC3.

E Series Lighting - EOV
IP65 rated Shallow Oval all-polycarbonate decorative luminaire in White or Black with Opal diffuser. Supplied complete with lamp. Integral emergency operation available.

E Series Lighting - EC6
IP65 rated shallow surface or semi-recessed all polycarbonate white body and opal diffuser. Supplied complete with lamps. Integral emergency operation, conduit spacer collars and semi-recessing kits available.

E Series Lighting - EFF Circular Full Face Front
High Quality Cast Alloy IP65 rated vandal resistant surface mounted luminaires with opal polycarbonate diffuser. Available in silver or graphite black epoxy finish with full open face, half hood or grille design. Supplied with lamp and vandal resistant screws. Integral emergency operation available.

E Series Lighting - EFH Circular Half Hood Front
High Quality Cast Alloy IP65 rated vandal resistant surface mounted luminaires with opal polycarbonate diffuser. Available in silver or graphite black epoxy finish with full open face, half hood or grille design. Supplied with lamp and vandal resistant screws. Integral emergency operation available.

E Series Lighting - EFG Circular Grille Front
High Quality Cast Alloy IP65 rated vandal resistant surface mounted luminaires with opal polycarbonate diffuser. Available in silver or graphite black epoxy finish with full open face, half hood or grille design. Supplied with lamp and vandal resistant screws. Integral emergency operation available.

E Series Lighting - EFF Square Full Face Front
High Quality Cast Alloy IP65 rated vandal resistant surface mounted luminaires with opal polycarbonate diffuser. Available in silver or graphite black epoxy finish with full open face, half hood or grille design. Supplied with lamp and vandal resistant screws. Integral emergency operation available.

E Series Lighting - EFH Square Half Hood Front
High Quality Cast Alloy IP65 rated vandal resistant surface mounted luminaires with opal polycarbonate diffuser. Available in silver or graphite black epoxy finish with full open face, half hood or grille design. Supplied with lamp and vandal resistant screws. Integral emergency operation available.

E Series Lighting - EFG Square Grille Front
High Quality Cast Alloy IP65 rated vandal resistant surface mounted luminaires with opal polycarbonate diffuser. Available in silver or graphite black epoxy finish with full open face, half hood or grille design. Supplied with lamp and vandal resistant screws. Integral emergency operation available.

White

Black

EOC Lighting Series
IP65 rated slim surface mounted all polycarbonate range with white or black bodies and opal diffusers. Features a ‘quick release’ diffuser fixing system and a conduit side entry facility. Supplied complete with lamp. Integral emergency operation and surface conduit spacer collars available.

FT400 Retro Kit

BEFORE

AFTER

FT400 Retrofit Lighting Kit
The FT400 Retro-fit makes it simple and cost effective to upgrade your school’s or office's lighting, save energy and reduce the carbon footprint.

FT400 Retro-fit kit is a fully wired and tested gear tray complete with T5 lamp/s, electronic control gear and a new diffuser cover which all fit onto the existing light fitting body fixed to your ceiling. This avoids damage to the ceiling, no disruption to wiring and the kits can usually be easily fitted and connected by qualified personnel in shorter time than a complete replacement.

A lighting retrofit is the practice of replacing components in the system with counterparts that make it use energy more efficiently. A lighting upgrade is any strategy that reduces the system's energy use. Energy savings are realised over time that can be significant enough to not only pay for the new equipment, but produce a return on the investment.

Single

Twin

WP Series Lighting - High Frequency - T8 Lamps
Surface IP65 Luminaire Single or Twin lamp with polycarbonate diffuser and colour 840 fluorescent T8 lamp.

Single

Twin

WP Series Lighting - High Efficiency and High Output - T5 Lamps
Surface IP65 Luminaire Single or Twin lamp with polycarbonate diffuser and colour 840 fluorescent T5 lamp.

X Series Lighting - XBL30
30 x LED Emergency Bulkhead
Surface mounted 3 hour duration all polycarbonate IP65 rated bulkhead with 30 LED’s. The white body and clear optical diffuser offers unobtrusive maintained or non maintained emergency lighting. Ideally suited to interior or exterior applications. A self adhesive legend kit is available to make up direction signage as required.

X Series Lighting - XBL8
8w T5 Lamp Emergency Bulkhead
Surface mounted 3 hour duration all polycarbonate IP65 rated bulkhead with 8w fluorescent lamp. The white body and clear optical diffuser offers unobtrusive maintained or non maintained emergency lighting. Ideally suited to interior or exterior applications. A self adhesive legend kit is available to make up direction signage as required.

X Series Lighting - XEM
8w Exit Signs
The XEM range is designed to illuminate Exit legends and offer 3 hour duration escape route illumination via it’s downlighting section. All steel construction body and front frame with opal Tpa polycarbonate diffuser panels and utilising an 8w T5 lamp. Available in White, Chrome and Brass decorative finishes.

X Series Lighting - XFL
Recessed Emergency 'Brick Light'
A recessed 8w ‘brick light’ type escape route luminaire for interior use with galvanised steel body and decorative front frame with prismatic Tpa polycarbonate front panel. The front frame is available in White, Chrome or Brass finish. An opal polycarbonate front panel and self adhesive direction legends are available as options. Please specify when ordering.

X Series Lighting - XLD
Recessed and Surface LED Emergency Fitting
Utilising low energy high output LED technology, the XLD offers non maintained escape route lighting. The XLD is a self contained unit that can be fully recessed or surface mounted. The unit is finished in white and features a self test operation.

X Series Lighting - XLR
Recessed LED Emergency Fitting
Utilising low energy high output LED technology, the XLR offers maintained escape route lighting. The XLR is a small self contained unit that is for recessed mounting. The unit is finished in white and features a self test operation.

X Series Lighting - XRB
LED Semi Recessed Blade
Exit Sign
A maintained recessed ceiling box with a hanging double sided blade sign. Utilising 15 low energy high output LED’s. Available in White, Chrome or Brass finish and self test option if required.

X Series Lighting - XSB
LED Surface or Suspended Blade Exit Sign
The versatile maintained XSB sign system utilises 15 high output energy efficient LED’s and can be suspended, ceiling or wall mounted. Double sided blade is illuminated from above and the body is available in White, Brushed Silver or Brushed Brass finish. Self test options available.

X Series Lighting - XTS
LED High Output Emergency Twinspot
For use in larger areas such as sports halls, retail and commercial areas, the new high power LED driven twinspot emergency luminaire addresses the issues of previous old bulky twin halogen twin spots of the past. Compact, discreet, lighter and with 3 x 1watt LED machined heads this attractive unit can be surface, wall or ceiling mounted and even suspended if required. Available in White or Brushed Silver finish.